KOLD STER-IL® U.S. PATENT HYDRAULIC/INSTALLATION
1) The Kold Ster-il® Filtration System can be connected to either municipal water or well-supplied water system. 2) Before replacing filter media turn off shut-off valves #2 & #3, then press the air bleed button on Top of canister #3. Use the included plastic wrench to loosen and remove canisters. Place a pail under each canister to catch water. Always clean and regrease, with a teflon based food contact rated grease, all "O" rings during a filter media replacement. 3) Cleaning or exposing the clear canister to solvents, strong acids or bases will result in permanent damage, voiding any warranty, producing : stress cracks, lines, crazying exterior clarity or finish texture and leakage.
4) Maximum usable flow rate 3.78 Gpm. 5) Maximum water line pressure 125 psig. Cold Water Only. 6) Change filter media at or before 5,000 gallons of volume.
7) Remove filter media from system during extended shutdown.
8) Immune Suppress Individuals should not contact used media.
9) The Kold Ster-il® filter system and media is covered by multiple U.S. Patents. No Patent rights are given or inferred through the sale of the system or media.
10) The usage of other manufacturer's media in place of Poly-Bio-Marine, Inc.® is against federal laws and dangerous as the filter media fail at 3.78 gpm.